ACTIVATOR/ACCELERATOR – Quantities Vary
ACTIVATOR/ACCELERATOR: Catalyst, Activator/Accelerator. Our standard Activator/Accelerators (AA) works with our Blue, Black and Green Adhesives to bond your repair or the substrates that you are joining together. The AA is a critical component in our patented Polymer Bonding Process.
Quantities Available:
- 0.5 oz bottle (AA001)
- 1 oz bottle (AA111)
- 2 oz bottle (AA121)
- 4 oz bottle (AA401)
- 8 oz bottle (AA141)
- 16 oz bottle (AA151)
- 1 gal bottle (AA161)
Brand Tech-Bond Solutions
Specific Uses for Product Speeds the cure of our Adhesives (cyanoacrylates, or CAs)
Material Acetone and Dimethyl Toluidine
Item Form Liquid
About this item
- SPEED: Our accelerators speed the cure of our Blue, Black and Green Adhesives (cyanoacrylates, or CAs.
- INTISIFIED REACTION: Activators intensify the chemical reaction that occurs with the Adhesives (CAs). (Foam safe adhesives generally do not have the same reaction.)
Product details
- Language: English
- Product Dimensions: Varies by Size
- Item model number: Varies According to Product Quantity (see above)
- Availability: Immediately
- Manufacturer: Tech-Bond Solutions, LLC
Product Description
The common understanding is that accelerators speed the cure of cyanoacrylates, commonly known as super glues. A more meaningful definition is that activators intensify the chemical reaction that occurs with the CA. Foam safe adhesives do not generally have the same reaction.
The Activator/Accelerator Is Available in the Following Tech-Bond Solutions’ Kits
· All Starter Kits
· All Basic Kits
· All Poly Kits
· All Deluxe Kits
· All Professional Kits
· Funeral Home Kits
· All Taxidermy Kits
How to apply the Activator/Accelerator:
1) Spray one edge with the Activator/Accelerator (AA).*
2) Let the A/A dry.
3) Take a blow dryer or a heat gun and WARM both edges/surfaces. Don’t overheat. The poly surface(s) should be very warm, but not hot.
*Alternatively, you can also apply the prime with the Poly Prep, warm the two edges of the crack, break or tear, then apply the SI adhesive to one surface, press the surfaces together and spray the seam with A/A. Hold firmly for 10 seconds then warm for 20 seconds.